縫前設備 縫制設備 縫制配件 整理設備 繡花機 內衣機械 服裝輔助設備 洗滌機械 二手服裝機械 其它服裝機械
上海榮計達儀器科技有限公司
上海榮計達儀器科技有限公司
| 參 考 價 | 面議 |
產品型號DWSZ-300
品 牌
廠商性質其他
所 在 地上海市
紡織服裝機械網采購部電話：0571-88918531
QQ:2568841715
聯系方式：查看聯系方式
更新時間：2024-02-14 15:02:37瀏覽次數：175次
聯系我時，請告知來自 紡織服裝機械網可實現標準UU/CU/CD抗剪強度試驗、恒溫恒壓條件下土體材料的流變試驗、梯度溫控條件下（-25℃ - 常溫）的UU/CU/CD抗剪強度試驗、各向同性固結試驗、各向異性固結試驗、圍壓和反壓梯度施加的反壓飽和試驗（包括孔隙水壓力系數B值檢測）、K0固結試驗等。
一、功能
可實現標準UU/CU/CD抗剪強度試驗、恒溫恒壓條件下土體材料的流變試驗、梯度溫控條件下（-25℃ - 常溫）的UU/CU/CD抗剪強度試驗、各向同性固結試驗、各向異性固結試驗、圍壓和反壓梯度施加的反壓飽和試驗（包括孔隙水壓力系數B值檢測）、K0固結試驗等。
1. Function
It can realize the standard UU/CU/CD shear strength test, the rheological test of soil materials under constant temperature and pressure conditions, the UU/CU/CD shear strength test under gradient temperature control conditions (-25℃-normal temperature), each Homogeneous consolidation test, anisotropic consolidation test, back pressure saturation test applied by confining pressure and back pressure gradient (including pore water pressure coefficient B value detection), K0 consolidation test, etc.
二、技術指標
1、儀器須全部適用以下試驗試樣尺寸：?39.1mm*80mm、?61.8mm*125mm。
2、試驗腔室可以同時滿足水、氣體和冷凍液三種介質條件，以滿擬土體環境加載壓力0-2MPa所需。
3、加載自動機電控制系統：豎向加載速度：0.0001-3mm/min，加載速度設定范圍：0.0001-5.0000mm/min；加載應力范圍0－40MPa可調，控制精度0.3%FS；圍壓范圍0－2MPa連續可調。
4、液壓控制系統：量程0-2MPa，控制精度1kPa；全自動控制，壓力范圍0-2MPa連續可調；體積量程250ml、體積分辨率0.001 ml。
5、試驗腔室所模擬土體環境加載過程中采用高精度液壓控制器進行精確控制、快速跟蹤，控制精度1kPa。
6、梯度溫控區間：-25℃-常溫，梯度控制；溫度控制精度±1℃、分辨率0.1℃。
7、梯度溫控流變試驗加載壓力采用外置荷重傳感器測量，測試量程0-50kN，精度≤0.3%FS；流變試驗加載壓力采用內置荷重傳感器測量，測試量程0-5kN，精度0.3%FS。
8、試驗中土體豎向位移測量：量程0-50mm，精度≤0.001mm。
9、孔隙水壓力測量要求全自動測量，量程0-1MPa，精度≤0.3%FS。
10、數據采集系統及數據存儲系統：軟件具有對系統工作狀態的動態監測、跟蹤分析、實時反饋、及時調整、過程顯示與數據存儲、及時更新的全數控自動化功能。
11、數據處理軟件：土體抗剪強度試驗，可以進行UU、CU、CD試驗數據處理，確定土體強度參數；流變試驗可在一定的土體環境加載條件下建立試驗時間與土體變形的關系；梯度溫控試驗可在不同溫度條件、一定的土體環境加載條件下，建立土體應力與應變關系，獲得土體力學特性參數。
Two, technical indicators
1. The instrument must be all applicable to the following test sample sizes: ?39.1mm*80mm, ?61.8mm*125mm.
2. The test chamber can meet the three medium conditions of water, gas and freezing liquid at the same time, so as to meet the requirements of the simulated soil environment loading pressure of 0-2MPa.
3. Loading automatic electromechanical control system: vertical loading speed: 0.0001-3mm/min, loading speed setting range: 0.0001-5.0000mm/min; loading stress range 0-40MPa adjustable, control accuracy 0.3%FS; confining pressure range 0-2MPa continuously adjustable.
4. Hydraulic control system: range 0-2MPa, control accuracy 1kPa; fully automatic control, pressure range 0-2MPa continuously adjustable; volume range 250ml, volume resolution 0.001ml.
5. During the loading process of the simulated soil environment in the test chamber, a high-precision hydraulic controller is used for precise control and fast tracking, with a control accuracy of 1kPa.
6. Gradient temperature control interval: -25℃-normal temperature, gradient control; temperature control accuracy ±1℃, resolution 0.1℃.
7. The loading pressure of the gradient temperature control rheological test is measured by an external load cell, the test range is 0-50kN, and the accuracy is ≤0.3%FS; the rheological test load pressure is measured by the built-in load cell, the test range is 0-5kN, and the accuracy is 0.3%FS .
8. Vertical displacement measurement of soil in the test: range 0-50mm, accuracy ≤0.001mm.
9. The measurement of pore water pressure requires automatic measurement, with a range of 0-1MPa, and an accuracy of ≤0.3%FS.
10. Data acquisition system and data storage system: The software has full numerical control automation functions such as dynamic monitoring, tracking analysis, real-time feedback, timely adjustment, process display and data storage, and timely update of the working status of the system.
11. Data processing software: soil shear strength test, UU, CU, CD test data can be processed to determine soil strength parameters; rheological test can establish test time and soil deformation under certain soil environmental loading conditions The gradient temperature control test can establish the relationship between soil stress and strain under different temperature conditions and certain soil environmental loading conditions, and obtain soil mechanical characteristic parameters.
三、主要配置
1、梯度溫控試驗腔室2套（39.1mm61.8mm）和流變試驗腔室各1套（39.1mm）；
2、50kN加載裝置及加載自動機電控制系統1套；
3、2MPa高精度全自動液壓控制系統2套；
4、梯度溫控裝置1套；
5、外置/內置荷重傳感器各1個；孔隙水壓力傳感器1套；
6、全自動數據采集、數據分析軟件1套。
Three, the main configuration
1. Two sets of gradient temperature control test chambers (39.1mm61.8mm) and one set of rheology test chambers (39.1mm);
2. 1 set of 50kN loading device and loading automatic electromechanical control system;
3. 2 sets of 2MPa high-precision automatic hydraulic control system;
4. 1 set of gradient temperature control device;
5. 1 external/built-in load sensor; 1 set of pore water pressure sensor;
6. One set of automatic data acquisition and data analysis software.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
紡織服裝機械網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
