當前位置：深圳市昂為電子有限公司>>過程氣體分析>>氫氣分析儀 CONTHOS 3

氫氣分析儀 CONTHOS 3

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地深圳市

在線詢價收藏產品查看聯系電話

紡織服裝機械網采購部電話：0571-88918531QQ:2568841715

聯系方式：查看聯系方式

更新時間：2024-07-30 09:50:44瀏覽次數：96次

聯系我時，請告知來自紡織服裝機械網

產品分類 品牌分類

  過程氣體分析

全部產品列表

暫無信息

深圳市昂為電子有限公司

經營模式：其他

商鋪產品：58條

所在地區：

詢價 給他留言

產品簡介

基于熱導原理的在線式氫氣分析儀，長期穩定應用于鋼鐵、冶金行業，化學工業以及其他需要分析氫氣濃度的領域。該系統反應速度快，低于2秒鐘，并且能保持反應速度的穩定。分析系統具有多種版本可選，有機柜式、現場安裝的機箱系統，以及具有1區和2區EX防爆等級的成套系統提供?？啥嗔砍掏瑫r測量并自動切換。

詳細介紹

據顯示, 信號輸入和輸出

用戶界面	LCD 顯示 40 字x 16 行 + 圖條狀態文字顯示和狀態輸出語言:英語/德語
信號輸出	2個可設定的獨立電隔離輸出: RLoad = 600Ω max. 輸出值: 0-20 mA, 4-20mA, 4-20mA (依據NAMUR NE43) 和測試信號值(0mA, 4mA, 10mA, 12mA & 20 mA)
數字輸出 (儀器狀態)	觸電輸出儀器狀態 (28V max.; 350mA max.) : 故障 \| 維護需求 \| 維護
模擬輸入(optional)	3 電隔離輸入 0 – 20mA 或 4 – 20mA (Ri = 50Ω)
數字 I/O 2 (optional)	數字輸入: 8 數字輸入 (6 – 24VDC; 10mA max.) • 遙控量程切換 • 外部校準 •切換第二個量程的干擾補償 • 用戶定義的輸入到數字輸出數字輸出: 7數字輸出 (浮動觸點 28V max.; 350mA max.) • 報警值 (每量程一個報警值)

Analytical-/ Operational Data

Measuring principle	Difference in thermal conductivity (?λ) of various gases
Measured quantity	Concentration of a particular gas component in binary and quasi-binary mixtures. In many applications involving multi-component gases the inherent non-selectivity of the thermal conductivity principle can be minimized using interference correction techniques. Physical interference reduction is sometimes possible with certain applications due to the wide temperature range of the CONTHOS' TC-detector.
Measuring ranges	Up to 3 independently configurable, switchable ranges. The reference response of each range is factory linearized (4th-degree polynomial). Suppressed output ranges within the corresponding reference range can be easily configured. Range switching is accomplished manually, automatically and/or externally (via optional digital inputs). lowest range: 0 - 0.5% H2 in N2 or 99.5-99% H2 in N2 (or equivalent ?λ) largest range: 0 - 99% H2
Response time τ90	approx. 2 sec. (dependent upon gas flow and analyzer configuration) (integration time configurable)
Precision	≤ 0.5% F.S.O. (typically better than ± 0.2% F.S.O.)
Accuracy	better than ± 0.5% F.S.O. (typically better than ± 0.3% F.S.O.)
Calibration	Manual: 2-point (offset/span) calibration Option: automatic or semi-automatic calibration in conjunction with the optional digital I/O-board or RS-485
Interference correction	3 correction channels for static and/or dynamic interference correction (dynamic correc tion only in conjunction with the optional analog inputs or RS-485) One of the prerequisites for dynamic interference correction is the availability of a selective signal, proportional to the particular gas component to be corrected for. The processing of analyzer ranges with a suppressed zero range is not possible.