JGJX-2C系列 液壓擺臂式裁斷機
用于工業上利用刀模裁斷軟塑料板材、皮革、纖維、棉紡織品、硬紙或其他類似材料。
1.設有自動供油系統，減少磨損，延長使用壽命。
2.采用電子延時電路控制沖程下限位置，精度高，可提高制鞋品質，利用手輪調節擺臂距工作臺高度，簡單、可靠、方便。
技術參數 | |||
型號 | JGJX-2C/12 | JGJX-2C/20 | JGJX-2C/25 |
沖裁力 | 120KN | 200KN | 250KN |
擺臂寬度 | 330*450mm | 350*550mm | 450*550mm |
沖程調節范圍 | 5-55mm | 5-75mm | 5-75mm |
沖裁速度 | 0.10m/s | 0.10m/s | 0.10m/s |
上、下工作臺面使用距離 | 60-140mm | 65-150mm | |
下工作臺面尺寸 | 900*400mm | 1000*500mm | |
電機功率 | 1.1KW | 1.5KW | |
注：裁斷區域選用普通冷鋼焊接刀模。選用激光木樣刀模。特殊規格可定制。
GSB-2C series hydraulic swing arm type cutting machine
USE AND CHARACTER
It used cutting die in industry to cut soft plastic plates，leather，fiber，cotton textiles，hard paper and such other materials.
1.There is automatic oil-supply lubricating system to reduce attrition and increase service life.
2.Electronic time-delay circuit is applied to control lower limit position of travel. This helps to promote shoe-making quality with a high precision. A hａnd wheel to adjust the distance between swing-arm and working table makes the machine simple in structure, easy in operation and reliable in performance.
TECHNICAL SPECIFICATION | |||
Model number | JGJX-2C/12 | JGJX-2C/20 | JGJX-2C/25 |
Max scissor force | 120KN | 200KN | 250KN |
Sway arm width | 330*450mm | 350*550mm | 450*550mm |
Stroke adjustment | 5-55mm | 5-75mm | 5-75mm |
Scissor speed | 0.10m/s | 0.10m/s | 0.10m/s |
Distance between upper table and lower table | 60-140mm | 65-150mm | |
upper and lower table | 900*400mm | 1000*500mm | |
Motor power | 1.1KW | 1.5KW | |
Note: The selection of ordinary cold steel cutting die area. Selection of laser-like knife mold. Special specifications can be customized
