819C Series integrating sphere photodiode power sensors feature NIST traceable calibration for use with Newport power meters. They are ideal for high power measurements of collimated beams requiring fast response.
| 對比 | 型號 | 光譜范圍 | 球體尺寸 | 可測量功率 |
 | 819C-UV-2-CAL 積分球探測器，準直光束，2 英寸，200-1100 nm | 200 - 1100 nm | 2 in. | 100 mW |
 | 819C-UV-5.3-CAL 積分球探測器，準直光束，5.3 英寸，220-1100 nm | 220 - 1100 nm | 5.3 in. | 500 mW |
 | 819C-SL-2-CAL2 積分球探測器，準直光束，2 英寸，400-1100 nm | 400 - 1100 nm | 2 in. | 1900 mW |
 | 819C-SL-3.3-CAL 積分球探測器，準直光束，3.3 英寸，400-1100 nm | 400 - 1100 nm | 3.3 in. | 170 mW |
 | 819C-SL-5.3-CAL2 積分球探測器，準直光束，5.3 英寸，400-1100 nm | 400 - 1100 nm | 5.3 in. | 4000 mW |
 | 819C-IG-2-CAL 積分球探測器，準直光束，2 英寸，800-1650 nm | 800 - 1650 nm | 2 in. | 1500 mW |
 | 819C-IG-3.3-CAL 積分球探測器，準直光束，3.3 英寸，910-1650 nm | 800 - 1650 nm | 3.3 in. | 3500 mW |
 | 819C-IG-5.3-CAL 積分球探測器，5.3 英寸，準直光束，860-1650 nm | 930 - 1650 nm | 5.3 in. | 4000 mW |
產品規格
| 型號 |  |  |  |
| 819C-UV-5.3-CAL | 819C-SL-5.3-CAL2 | 819C-IG-5.3-CAL | |
| 探測器類型 | Collimated Beam Integrating Sphere | Collimated Beam Integrating Sphere | Collimated Beam Integrating Sphere |
| 探測器輸入 | Free Space | Free Space | Free Space |
| 探測器材料 | UV Enhanced Silicon | Silicon | Indium Gallium Arsenide |
| 光譜范圍 | 220 - 1100 nm | 400 - 1100 nm | 930 - 1650 nm |
| 感光尺寸 | ?11.3 mm | ?11.3 mm | ?3 mm |
| 可測量功率 | 500 mW | 4000 mW | 4000 mW |
| 最小可測量功率 | 100 nW | 100 nW | 1 µW |
| 端口類型 | DB15 | DB15 | DB15 |
| 輸入端口尺寸 | 1.0 in. | 1.0 in. | 1.0 in. |
特征
 | Collimated Beam Input Depending on the beam divergence characteristics of the light source, Newport offers two different types of integrating sphere detectors – Divergent or Collimating. The 819C series are used for a collimated input beam, such as a laser beam. When the collimated beam is measured, the baffle needs to be placed between the first reflection off of the internal wall of the sphere and the detector. The baffle prevents direct radiation from the hot spot from hitting the detector, which allows the spatially integrated beam power measurement. |
| 全不銹鋼結構 |
| SMA 光纖適配器位于北極 所有球體都帶有北極 SMA 光纖適配器作為標準功能，允許少量光拾取以用于波長測量或任何進一步分析，不影響整個系統校準。所有積分球探頭都在已安裝轉接器情況下進行校準。 |  |
 | Post-Mountable for Accurate Measurements To ensure accurate measurements, it is recommended to mount these integrating spheres securely. One way to do so is by mounting them on an optical post. |
| 全不銹鋼結構 |
| 高級 –CAL2 型號 帶“-CAL2”后綴的型號是有內置熱電偶和 OD1 衰減器的探頭。當連接到 1830-R、1918-R、1936-R 或 2936-R 型號功率計時，這些探頭將自動識別衰減器開/關位置和探頭溫度。 |  |
 | Integrating Sphere Accessories Newport offers accessories that are compatible with our integrating spheres to build a complete integrating sphere system. Various adapters are available to change port frame diameter, reduce an input port's clear aperture, measure fiber optic power, connect lens tubes and mount sensors. Port plugs to block an unused sphere port are also available. |
| 全不銹鋼結構 |
| Factors that Affect Maximum Measurable Power |
| The maximum measurable power of photodiode sensors is dependent on several factors such as the wavelength of incoming light, photodiode current output saturation, temperature, use of an attenuator and a power meter's maximum current input value. Newport provides maximum power specifications based on the power meter models, with and without an attenuator, and wavelength-dependent maximum power level. With these factors affecting measurable power in mind, choosing the proper detector for your |
