一、產品簡介：
適用于各類板材抗折強度試驗機，試驗機外觀精美、工藝細膩，采用伺服控制系統，可實現勻速加載效率高穩定性好。采用觸摸屏控制，友好的人機操作界面。儀器內部設有行程限位和正負加載保護功能。具有測試速度可調、負荷測量精度高、操作方便等特點。適用于工廠、建筑工程質量檢測站、建筑公司、產品質量檢驗所、科研院校、生產檢驗、開發研究等領域。
First, the product introduction:
Applicable to all kinds of sheet bending strength testing machine, the testing machine is exquisite in appearance and exquisite in craftsmanship. It adopts servo control system, which can achieve uniform loading efficiency and high stability. With touch screen control, friendly man-machine interface. The instrument has a travel limit and positive and negative load protection inside. It has the characteristics of adjustable test speed, high load measurement accuracy and convenient operation. Applicable to factories, construction engineering quality inspection stations, construction companies, product quality inspection institutes, research institutes, production inspection, development research and other fields.
二、特點：
嵌入式Widows操作系統環境的測控軟件，實時顯示測試數據、曲線、試驗過程自動控制，試驗結束自動求取試驗結果、軟件簡便易用；
采用電腦控制，可實現力速度、位移速度、編程三種加載方式，可滿足不同標準試驗要求。
采用伺服控制系統，**控制檢測過程。
試驗機內部設有行程限位和正負力值過載保護功能，防止誤操作引起試驗機的損壞。
Second, the characteristics:
The embedded Widows operating system environment measurement and control software, real-time display of test data, curves, automatic control of the test process, the test results are automatically obtained at the end of the test, the software is simple and easy to use;
With computer control, it can realize three kinds of loading modes: force speed, displacement speed and programming, which can meet different standard test requirements.
The servo control system is used to precisely control the inspection process.
The test machine is internally provided with a travel limit and a positive and negative force value overload protection function to prevent damage to the test machine caused by misoperation.
三、符合標準：
GBT 9775-2008 紙面石膏板（加荷速度：4.2N/S）
JS/T 799-2016 裝飾石膏板（加荷速度：4.9N/S）
GBT7019-2014 纖維水泥制品試驗方法
JCT746-2007混凝土瓦
GBT 3810.4-2016陶瓷磚試驗方法 第4部分：斷裂模數和破壞強度的測定
GBT 3810.4-2016陶瓷磚試驗方法 第四部分：斷裂模數和破壞強度的測定
GBT 17657-2013 人造板及飾面人造板理化性能試驗方法
Third, in line with the standard:
GBT 9775-2008 plasterboard (loading speed: 4.2N/S)
JS/T 799-2016 Decorative plasterboard (loading speed: 4.9N/S)
GBT7019-2014 Test method for fiber cement products
JCT746-2007 concrete tile
Test methods for ceramic tiles - Part 4: Determination of modulus of rupture and strength
Test method for ceramic tiles GBT 3810.4-2016 Part 4: Determination of rupture modulus and failure strength
GBT 17657-2013 Test method for physical and chemical properties of wood-based panels and veneered panels
四、技術參數：
★大拉拔力：10KN
★有效檢測范圍：大實驗力的1%-%
★負荷測量精度：0.1N
★負荷測量精度：示值的±1%以內
★試驗速度：1mm-50mm/min
★試驗空間范圍：200mm
★驅動方式：伺服電機驅動
★電源：?jiǎn)蜗嘟涣?20V/50HZ, 電機功率550W
★外形尺寸：1400X1200X1500mm
★重量：220kg
Fourth, technical parameters:
★ Large pulling force: 10KN
★ Effective detection range: 1%-% of large experimental power
★L(fēng)oad measurement accuracy: 0.1N
★L(fēng)oad measurement accuracy: within ±1% of the indicated value
★ Test speed: 1mm-50mm/min
★Test space range: 200mm
★Drive mode: servo motor drive
★ Power supply: single-phase AC 220V/50HZ, motor power 550W
★Dimensions: 1400X1200X1500mm
★ Weight: 220kg
五、儀器組成：
★觸摸屏
★電源開關
★力值傳感器
★施壓棒
★承壓棒
★主機機體
Fifth, the instrument composition:
★Touch screen
★Power switch
★force value sensor
★ pressure bar
★ pressure bar
★Host body
