紫外加速老化試驗箱適用于通過光水曝露加速老化試驗，預測油漆、涂料、塑料等非金屬材料的相對耐久性，尤其適合觀察特別耐用材料的物理性能破壞，如光澤降低、霧影、強度降低、粉化、開裂、起泡、脆化和褪色等。
The UV aging test box is suitable for accelerated aging test by light water exposure to predict the relative durability of non-metallic materials such as paints, coatings, and plastics. It is especially suitable for observing the physical property damage of particularly durable materials, such as reduced gloss, haze, reduced strength, Powdering, cracking, blistering, embrittlement and fading.
紫外加速老化試驗箱使用說明：
同其它實驗室加速試驗一樣，不能利用本裝置的試驗結果替代天然曝曬來判定材料的實際耐久年限，但本裝置提供的對比試驗條件，對快速評估材料的抗老化性能、篩選或改進新老配方、監控產品質量是相對實用的。
由于紫外光是造成戶外產品耐用度下降的主要光照因素，加上熒光燈管相對穩定的光譜能量分布和低廉的價格，紫外光老化試驗箱以快捷、便利和經濟的優勢成為世界上目前使用為廣泛的耐候測試機種。本裝置作為簡易機型，特別適合經濟條件有限的實驗室選用。
Instructions for UV aging test box:
As with other accelerated laboratory tests, the test results of this device cannot be used instead of natural exposure to determine the actual durability of the material, but the comparative test conditions provided by this device can quickly evaluate the anti-aging properties of materials, screen or improve new and old formula Monitoring product quality is relatively practical.
As ultraviolet light is the main lighting factor that causes the durability of outdoor products to decrease, coupled with the relatively stable spectral energy distribution of fluorescent tubes and low prices, the ultraviolet light aging test box has become a widely used in the world with its fast, convenient and economic advantages Weathering test models. As a simple model, this device is especially suitable for laboratories with limited economic conditions.
紫外加速老化試驗箱結構與工作原理：
采用的旋轉樣板架設計可以很好地補償由于燈管老化和各批次差異等諸多因素帶來的光輻射不均勻缺陷，省卻了一般儀器需定期按順序互換樣板位置的繁重工作量。
由于水分是加速老化的重要破壞因素，本裝置采用水噴淋方式模擬濕氣的影響。通過對噴淋時間的設定，可以比較接近某些最終使用的環境條件，如溫度劇變或雨水沖刷所造成的機械侵蝕等。
本裝置的LUV型還可以在適當范圍內通過溫控機構調節光化反應的速率。
為滿足耐候測試機堅固耐用的使用要求，本裝置結構件普遍采用了耐蝕不銹鋼材料。設計上力求結構簡單、便于使用和維修。只需付出相對低廉的使用成本，就可使您在短時間內了解自然條件下長時間才能形成的材料損害，判定試驗產品與對照樣板之間的品質差距。
Structure and working principle of UV aging test chamber:
The rotating sample frame design can well compensate for the uneven light radiation defects caused by many factors such as aging of the lamp tube and the difference between batches, which saves the heavy workload of ordinary instruments that need to periodically switch the sample position in sequence.
Since moisture is an important destructive factor for accelerated aging, this device uses water spraying to simulate the effects of moisture. By setting the spray time, it can be closer to some end-use environmental conditions, such as sudden temperature changes or mechanical erosion caused by rain.
The LUV type of the device can also adjust the rate of the photochemical reaction through a temperature control mechanism within an appropriate range.
In order to meet the rugged use requirements of the weather tester, corrosion-resistant stainless steel is commonly used in the structure of this device. Designed to be simple in structure, easy to use and maintain. You only need to pay a relatively low cost of use, so that you can understａnd the material damage that can form under natural conditions for a long time in a short time, and judge the quality gap between the test product and the control sample.
紫外加速老化試驗箱技術參數：
★總功率：1.25kw
★電源：220±22V/50±0.5Hz
★試驗時間定時范圍：0.01s~99.99s/0.1h~999.9h
★噴淋時間定時范圍（雙設定）：1s~99min59s/1min~9999min
★試驗溫度設定范圍（LUV－II型）：40～60℃
★紫外光峰值公稱波長（光量子能量）313nm(91.5kcal/gmol)
★紫外熒光燈管功率：0.02kw×3
★燈管額定壽命：1000h
★燈管對轉架軸線分布直徑：80mm
★燈管壁至試樣最近距離：28～61mm
★試樣轉架回轉直徑：?189～?249 mm
★試樣轉架傳動電機功率：0.025kw
★傳動電機轉速：1250r.p.m
★試樣轉架轉速：3.7cp.m
★水泵功率：0.08kw
★水泵流量：47m/min
★電熱管功率（LUV－II型）：1.0kw
★試樣規格75mm×150mm×(0.6)mm
★試驗箱外形尺寸（D×W×H）：395（385）×895×550mm
★重量：63kg
Technical parameters of UV aging test box:
★ Total power: 1.25kw
★ Power supply: 220 ± 22V / 50 ± 0.5Hz
★ Time range of test time: 0.01s ~ 99.99s / 0.1h ~ 999.9h
★ Spray time timing range (double setting): 1s ~ 99min59s / 1min ~ 9999min
★ Test temperature setting range (LUV-II): 40 ～ 60 ℃
★ Nominal wavelength of UV light (light quantum energy) 313nm (91.5kcal / gmol)
★ UV fluorescent tube power: 0.02kw × 3
★ Rated tube life: 1000h
★ The diameter of the axis distribution of the tube on the turntable: 80mm
★ The closest distance from the tube wall to the sample: 28 ～ 61mm
★ Swivel diameter of sample turntable:? 189 ～? 249 mm
★ Sample turret drive motor power: 0.025kw
★ Rotating motor speed: 1250r.p.m
★ Rotating speed of sample turret: 3.7cp.m
★ Water pump power: 0.08kw
★ Water pump flow: 47m / min
★ Electric heating tube power (LUV-II type): 1.0kw
★ Specification of sample 75mm × 150mm × (0.6) mm
★ External dimensions of test box (D × W × H): 395 (385) × 895 × 550mm
★ Weight: 63kg
LUV-II紫外加速老化試驗箱注意事項:
★具有高輻照度水平的UVB光源，雖然能大度地加速試驗進程，但有時也會對某些材料造成甚于天然曝曬的老化破壞，如過度變色。所以在評判與對照樣板有差異的試樣時，應注意這一因素。
★不使用未經檢定的非專用燈管。
★應配備專職值班人員在試驗的全過稱中監控老化和安全狀態。
★必須在關閉電源的前提下打開倉門或更換燈管。
★在沒有戴護目鏡時，不要用肉眼直接觀察點亮的紫外燈。以免皮膚灼傷。
★如水位明顯下降或LUV型試驗箱的水位報閃亮，應及時補充去離子水，避免水泵在無水狀態下運行。
★試驗區域不潔和不使用去離子水都會在試樣上生成妨礙觀察的水漬，也影響設備元器件的使用壽命。
★在整個試驗過稱中應保證電器箱上的冷卻風扇正常運行。
★要防止缺乏經驗的非**人員隨意觸動隨機儀表。
★對照試樣宜分別安裝于轉架的軸對稱位置以獲得對等的光照條件。
★本裝置系薄板密集型機構，操作與檢修時應注意安全，防止擦傷。
Note for LUV-II UV accelerated aging test box:
★ UVB light source with high irradiance level can greatly accelerate the test process, but sometimes it will cause aging damage to certain materials, such as excessive discoloration. Therefore, we should pay attention to this factor when judging the samples that are different from the control samples.
★ Do not use uncertified non-dedicated lamps.
★ Full-time duty personnel should be equipped to monitor the aging and safety status during the full test of the test.
★ The warehouse door must be opened or the lamp must be replaced with the power off.
★ When not wearing goggles, do not directly observe the lit UV lamp with the naked eye. To prevent skin burns.
★ If the water level drops significantly or the water level of the LUV type test box is shining, deionized water should be added in time to avoid the pump running in the anhydrous state.
★ The test area is not clean and does not use deionized water, it will generate water stains on the sample that hinder observation, and also affect the service life of equipment components.
★ During the entire test, the cooling fan on the electrical box should be ensured to operate normally.
★ To prevent inexperienced non-** personnel from randomly touching the random instrument.
★ Control samples should be installed in the axisymmetric position of the turntable respectively to obtain equivalent lighting conditions.
★ This device is a thin plate-intensive mechanism. Pay attention to safety and prevent abrasion during operation and maintenance.
